Port Configuration Summary
Port String Syntax Used in the CLI
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-3
Examples
This example shows the port-string syntax for specifying the 100-Mbps Ethernet ports 1 through
10 in the module in chassis slot 1.
This example shows the port-string syntax for specifying the 1-Gigabit Ethernet port 14 in the
module in chassis slot 3.
This example shows the port-string syntax for specifying Fast Ethernet ports 1 and 3 and Gigabit
Ethernet port 11 in the module in chassis slot 1:
This example shows the port-string syntax for specifying Fast Ethernet ports 1, 3, 7, 8, 9 and 10 in
the module in chassis slot 1:
This example shows the port-string syntax for specifying the 10-Gigabit Ethernet port 2 of the
module in chassis slot 3.
This example shows the port-string syntax for specifying all 1-Gigabit Ethernet ports in the
module in chassis slot 3.
This example shows the port-string syntax for specifying all 10-Gbps Ethernet ports in the chassis.
NOTE: You can use a wildcard (*) to indicate all of an item. For example, fe.3.* would
represent all 100Mbps Ethernet (fe) ports in the module in slot 3.
fe.1.1-10
ge.3.14
fe.1.1,fe.1.3;ge.1.11
fe.1.1,fe.1.3,fe.1.7-10
tg.3.1
ge.3.*
tg.*.*
To Next Page
Loading...
