Startup and General Configuration Summary
Factory Default Settings
2-2 Matrix DFE-Platinum and Diamond Series Configuration Guide
Does not apply to MATRIX E7.
Community name Public.
Convergence End
Points phone detection
Disabled globally and on all ports
EAPOL Disabled.
EAPOL authentication
mode
When enabled, set to auto for all ports.
GARP timer Join timer set to 20 centiseconds; leave timer set to 60 centiseconds;
leaveall timer set to 1000 centiseconds.
GVRP Globally enabled.
IGMP Disabled. When enabled, query interval is set to 125seconds and
response time is set to 100 tenths of a second.
IP mask and gateway Subnet mask set to 255.0.0.0; default gateway set to 0.0.0.0
IP routes No static routes configured.
Jumbo frame support Disabled on all ports.
Link aggregation
admin key
Set to 32768 for all ports.
Link aggregation flow
regeneration
Disabled.
Link aggregation
system priority
Set to 32768 for all ports.
Link aggregation
outport algorithm
Set to DIP-SIP.
Link Layer Discovery
Protocol (LLDP)
Both transmitting and receiving LLDPDUs are enabled.
LLDP transmit interval 30 seconds
LLDP hold multiplier 4
Table 2-1 Default Device Settings for Basic Switch Operation (Continued)
Device Feature Default Setting
To Next Page
Loading...
Need help?
General