Enterasys Matrix 2G4072-52 - Page 414

SNMP Configuration Command Set
Configuring SNMP Access Rights
5-28 Matrix DFE-Platinum and Diamond Series Configuration Guide
Command Mode
Read-Only.
Example
This example shows how to display SNMP access information:
Table 5-6 shows a detailed explanation of the command output.
Matrix(rw)->show snmp access
Group = SystemAdmin
Security model = USM
Security level = noAuthNoPriv
Read View = All
Write View =
Notify View = All
Context match = exact match
Storage type = nonVolatile
Row status = active
Group = NightOperator
Security model = USM
Security level = noAuthNoPriv
Read View = All
Write View =
Notify View = All
Context match = exact match
Storage type = nonVolatile
Row status = active
Table 5-6 show snmp access Output Details
Output What It Displays...
Group SNMP group name.
Security model Security model applied to this group. Valid types
are: SNMPv1, SNMPv2c, and SNMPv3 (User
based - USM).