SNMP Configuration Command Set
Configuring SNMP Notification Parameters
5-54 Matrix DFE-Platinum and Diamond Series Configuration Guide
Table 5-10 shows a detailed explanation of the command output.
Table 5-10 show snmp notify Output Details
Output What It Displays...
Notify name A unique identifier used to index the SNMP notify
table.
Notify Tag Name of the entry in the SNMP notify table.
Notify Type Type of notification: SNMPv1 or v2 trap or
SNMPv3 InformRequest message.
Storage type Whether access entry is stored in volatile,
nonvolatile or read-only memory.
Row status Status of this entry: active, notInService, or
notReady.
To Next Page
Loading...
