Enterasys Matrix 2G4072-52 - Page 635

VLAN Configuration Command Set
Enabling/Disabling GVRP
Matrix DFE-Platinum and Diamond Series Configuration Guide 7-39
Commands
The commands used to configure GVRP are listed below and described in the associated section as
shown.
• show gvrp (Section 7.3.6.1)
• show garp timer (Section 7.3.6.2)
• set gvrp (Section 7.3.6.3)
• clear gvrp (Section 7.3.6.4)
• set garp timer (Section 7.3.6.5)
• clear garp timer (Section 7.3.6.6)