Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-34 Matrix DFE-Platinum and Diamond Series Configuration Guide
ipxdest Classifies based on destination IPX address.
ipxsource Classifies based on source IPX address.
ipxdestsocket Classifies based on destination IPX socket.
ipxsourcesocket Classifies based on source IPX socket.
ipxtype Classifies based on IPX packet type.
llcDsapSsap Classifies based on DSAP/SSAP pair in 802.3 type
packet.
macdest Classifies based on MAC destination address.
macsource Classifies based on MAC source address.
tci Classifies based on Tag Control Information.
port Classifies based on port-string.
tcpdestportip Classifies based on TCP destination port with optional
post-fix IP address.
tcpsourceportip Classifies based on TCP source port optional post-fix IP
address.
udpdestportip Classifies based on UDP destination port optional post-fix
IP address.
udpsourceportip Classifies based on UDP source port optional post-fix IP
address.
vlantag Classifies based on VLAN tag.
data (Not required for ipfrag classification.) Specifies the code
for a predefined classifier. This value is dependent on the
classification type entered. Refer to Table 8-3 for valid
values for each classification type.
mask mask (Optional) Specifies the number of significant bits to
match, dependent on the data value entered. Refer to
Table 8-3 for valid values for each classification type and
data value.
To Next Page
Loading...
