IGMP Configuration Command Set
Configuring IGMP
10-14 Matrix DFE-Platinum and Diamond Series Configuration Guide
Table 10-1 show igmp config Output Details
Output What It Displays...
VlanQueryInterval Frequency (in seconds) of host-query frame
transmissions.
VlanStatus Whether or not VLAN configuration is Active or
Not in Service.
Vlan IGMP Version Whether or not IGMP version is 1 or 2.
VlanQuerier IP address of the IGMP querier.
VlanQueryMaxResponse
Time
Maximum query response time (in tenths of a
second).
VlanRobustness Robustness value
VlanLastMemberQueryIntvl Last member query interval. This is the maximum
response time inserted into group-specific queries
which are sent in response to Leave Group
messages. It is also the amount of time between
group-specific query messages.
VlanQuerierUpTime Time (in seconds) the IGMP querier has been
active.
To Next Page
Loading...
Need help?
General