IGMP Configuration Command Set
Configuring IGMP
Matrix DFE-Platinum and Diamond Series Configuration Guide 10-27
10.4.2.18 show igmp flow
Use this command to display IGMP flow information.
show igmp flows [portlist portlist] [group group] [vlan-list vlan-list] [sip sip]
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display all the IGMP flow information:
[portlist portlist] portlist - Port or range of ports.
[group group] group - group IP address (none means show all groups)
[vlan-list vlan-list] vlan-list - VLAN ID or range of IDs (1-4094)
[sip sip] sip - source IP address (none means show all sips)
Matrix(rw)->show igmp counters
Multicast Flows
Src Port Group Address Vlan Src IP
-----------------------------------------------
fe.1.20 224.1.1.1 1 45.67.89.23
fe.1.36 224.1.1.2 1 39.47.23.67
To Next Page
Loading...
