Enterasys Matrix 2G4072-52 - Page 836

Logging And Network Management Command Set
Configuring RMON
11-46 Matrix DFE-Platinum and Diamond Series Configuration Guide
Host
TopN
Generates tables that
describe hosts that top a
list ordered by one of
their statistics. These rate
based statistics are
samples of one of their
base statistics over an
interval specified by the
management station.
Statistics, top host(s),
sample stop and start
period, rate base and
duration.
show rmon topN
(Section 11.2.4.19)
set rmon topN properties
(Section 11.2.4.20)
set rmon topN status
(Section 11.2.4.21)
clear rmon topN
(Section 11.2.4.22)
Matrix Records statistics for
conversations between
two IP addresses. As the
device detects a new
conversation, it creates a
new matrix entry.
Source and destination
address pairs and packets,
bytes and errors for each
pair.
show rmon matrix
(Section 11.2.4.23)
set rmon matrix properties
(Section 11.2.4.24)
set rmon matrix status
(Section 11.2.4.25)
clear rmon matrix
(Section 11.2.4.26)
Table 11-5 RMON Monitoring Group Functions and Commands (Continued)
RMON
Group
What It Does... What It Monitors... CLI Command(s)