Logging And Network Management Command Set
Configuring Node Aliases
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-147
Table 11-16 show nodealias config Output Details
Output What It Displays...
Port Number Port designation.
Max Entries Maximum number of alias entries configured for this port.
Set using the set nodealias maxentries command
(Section 11.2.7.6).
Used Entries Number of alias entries (out of the maximum amount
configured) already used by this port.
Status Whether or not a node alias agent is enabled (default) or
disabled on this port.
To Next Page
Loading...
Need help?
General