IP Configuration Command Set
Configuring Routing Interface Settings
Matrix DFE-Platinum and Diamond Series Configuration Guide 12-7
12.2.1.3 ip ecm-forwarding-algorithm
Use this command to enable ECM (Equal Cost Multipath) for forwarding IP packets on routing
interfaces.
ip ecm-forwarding-algorithm [hash-thold | round-robin]
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command disables ECM mode.
no ip ecm-forwarding-algorithm
Command Type
Router command.
Command Mode
Global configuration: Matrix>Router1(config)#
Command Defaults
If algorithm is not specified, hash threshold will be set.
Example
This example shows how to enable ECM mode:
hash-thold |
round-robin
(Optional) Sets the ECM forwarding algorithm as hash
threshold or round-robin.
Matrix>Router1(config)#ip ecm-forwarding-algorithm
To Next Page
Loading...
