Enterasys Matrix 2G4072-52 - Page 973

IP Configuration Command Set
Managing Router Configuration Files
Matrix DFE-Platinum and Diamond Series Configuration Guide 12-13
12.2.2.1 show running-config
Use this command to display the non-default, user-supplied commands entered while configuring
the device.
show running-config
Syntax Description
None.
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
None.
Example
This example shows how to display the current router operating configuration:
Matrix>Router1#show running-config
!
router id 192.168.100.1
!
interface loopback 1
ip address 192.168.100.1 255.255.255.255
no shutdown
!
interface vlan 10
ip address 99.99.2.10 255.255.255.0
no shutdown
!
router ospf 1
network 99.99.2.0 0.0.0.255 area 0.0.0.0
network 192.168.100.1 0.0.0.0 area 0.0.0.0