IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
Matrix DFE-Platinum and Diamond Series Configuration Guide 12-91
In Service Whether or not this virtual server is enabled (using the
inservice command as described in Section 12.2.8.16).
Service Name Whether or not the service named can also be accessed
through this virtual server IP address. Configured using the
virtual command as described in Section 12.2.8.15. Note
that currently only FTP is supported.
client(s) allowed to
use the virtual
server(s)
Clients with permission to access this server. Set with the
client command as described in Section 12.2.8.17.
client(s) allowed
direct access to the
real server(s)
Clients with permission to access this server without
LSNAT translation. Set with the allow accessservers
command as described in Section 12.2.8.19.
Table 12-10 show ip slb vservers Output Details (Continued)
Output What It Displays...
To Next Page
Loading...
