Enterasys Matrix 2G4072-52 - Page 1165

Routing Protocol Configuration Command Set
Configuring OSPF
Matrix DFE-Platinum and Diamond Series Configuration Guide 13-63
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
If link-state-id is not specified, the specified type of database records will be
displayed for all link state IDs.
Example
This example shows how to display all OSPF link state database information:
Table 13-3 provides an explanation of the command output.
database-summary Displays a numerical summary of the contents of the link
state database.
Matrix>Router1#show ip ospf database
OSPF Router with ID(182.127.64.1)
Displaying Net Link States(Area 0.0.0.0)
LinkID ADV Router Age Seq# Checksum
182.127.63.1 182.127.62.1 956 0x80000001 0xb6ca
Displaying Router Link States(Area 0.0.0.0)
LinkID ADV Router Age Seq# Checksum LinkCount
182.127.64.1 182.127.64.1 308 0x8000000f 0x636b 2
182.127.62.1 182.127.62.1 952 0x8000001b 0x7ed7 1
Displaying Summary Net Link States(Area 0.0.0.0)
LinkID ADV Router Age Seq# Checksum
182.127.63.1 182.127.62.1 956 0x80000001 0xb6ca