Enterasys Matrix 2G4072-52 - Page 1250

Security Configuration Command Set
Configuring 802.1X Authentication
14-40 Matrix DFE-Platinum and Diamond Series Configuration Guide
Commands
The commands used to review and configure 802.1X are listed below and described in the
associated section as shown:
• show dot1x (Section 14.3.5.1)
• show dot1x auth-config (Section 14.3.5.2)
• set dot1x (Section 14.3.5.3)
• set dot1x auth-config (Section 14.3.5.4)
• clear dot1x auth-config (Section 14.3.5.5)