Security Configuration Command Set
Configuring 802.1X Authentication
14-50 Matrix DFE-Platinum and Diamond Series Configuration Guide
• If port-string is not specified, parameters will be set on all ports.
Examples
This example shows how to reset the 802.1X port control mode to auto on all ports:
This example shows how to reset reauthentication control to disabled on ports fe.1.1-3:
This example shows how to reset the 802.1X quiet period to 60 seconds on ports fe.1.1-3:
Matrix(rw)->clear dot1x auth-config authcontrolled-portcontrol
Matrix(rw)->clear dot1x auth-config reauthenabled fe.1.1-3
Matrix(rw)->clear dot1x auth-config quietperiod fe.1.1-3
To Next Page
Loading...
