Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14-56 Matrix DFE-Platinum and Diamond Series Configuration Guide
Mode PWA port control mode.
Auth Status Whether or not the port state is disconnected, authenticating
authenticated, or held (authentication has failed).
Quiet Period Amount of time a port will be in the held state after a user
unsuccessfully attempts to log on to the network. Default
value of 60 can be changed using the set pwa quietperiod
command as described in Section 14.3.6.18.
MaxReq Maximum number of log on attempts allowed before
transitioning the port to a held state. Default value of 2 can
be changed using the set pwa maxrequests command as
described in Section 14.3.6.19.
Table 14-3 show pwa Output Details (Continued)
Output What It Displays...
To Next Page
Loading...
