Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
3-32 Matrix DFE-Platinum and Diamond Series Configuration Guide
3.2.4.5 show lldp port location-info
Use this command to display configured location information for one or more ports. Ports are
configured with a location value using the set lldp port location-info command.
show lldp port location-info [port-string]
Syntax Description
Command Defaults
If port-string is not specified, port location configuration information will be
displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display port location information for three ports.
port-string (Optional) Displays port location information for one or a
range of ports.
Matrix(ro)->show lldp port location-info ge.1.1-3
Ports Type Location
-------- ------------- -------------------------
ge.1.1 ELIN 1234567890
ge.1.2 ELIN 1234567890
ge.1.3 ELIN 1234567890
To Next Page
Loading...
