Startup and General Configuration Summary
Factory Default Settings
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-5
Spanning Tree edge
port delay
Enabled.
Spanning Tree forward
delay
Set to 15 seconds.
Spanning Tree hello
interval
Set to 2 seconds.
Spanning Tree ID
(SID)
Set to 0.
Spanning Tree legacy
path cost
Disabled.
Spanning Tree
maximum aging time
Set to 20 seconds.
Spanning Tree
point-to-point
Set to auto for all Spanning Tree ports.
Spanning Tree port
priority
All ports with bridge priority are set to 128 (medium priority).
Spanning Tree priority Bridge priority is set to 32768.
Spanning Tree
topology change trap
suppression
Enabled.
Spanning Tree transmit
hold count
Set to 3.
Spanning Tree version Set to mstp (Multiple Spanning Tree Protocol).
Spanning Tree Loop
Protect
Disabled per port and per SID.
Spanning Tree Loop
Protect event threshold
3 events.
Table 2-1 Default Device Settings for Basic Switch Operation (Continued)
Device Feature Default Setting
To Next Page
Loading...
