Startup and General Configuration Summary
Factory Default Settings
2-6 Matrix DFE-Platinum and Diamond Series Configuration Guide
Spanning Tree Loop
Protect event window
180 seconds.
Spanning Tree Loop
Protect traps
Disabled.
Spanning Tree disputed
BPDU threshold
Set to 0, meaning no traps are sent.
SSH Disabled.
System baud rate Set to 9600 baud.
System contact Set to empty string.
System location Set to empty string.
System name Set to empty string.
Terminal CLI display set to 80 columns and 24 rows.
Timeout Set to 15 minutes.
User names Login accounts set to ro for Read-Only access; rw for Read-Write
access; and admin for Super User access.
VLAN dynamic egress Disabled on all VLANs.
VLAN ID All ports use a VLAN identifier of 1.
WebView (HTTP) Enabled on TCP port 80.
Table 2-1 Default Device Settings for Basic Switch Operation (Continued)
Device Feature Default Setting
To Next Page
Loading...
