SNMP Configuration Summary
Using SNMP Contexts to Access Specific MIBs or Routing Modules
5-4 Matrix DFE-Platinum and Diamond Series Configuration Guide
All SNMP contexts known to the device can be displayed using the show snmp context command
as described in Section 5.3.4.2.
Examples
This example permits the “powergroup” to manage all MIBs via SNMPv3:
This example grants the “powergroup” SNMPv3 management access from all router modules when
operating in router mode:
This example grants the “powergroup” SNMPv3 management access from the router running on
module 1 when operating in router mode:
For information on preparing the device for router mode, refer back to Section 2.3.
Matrix(rw)->set snmp access powergroup security-model usm
Matrix(rw)->set snmp access powergroup security-model usm context router prefix
Matrix(rw)->set snmp access powergroup security-model usm context router1 exact
To Next Page
Loading...
