SNMP Configuration Command Set
Reviewing SNMP Statistics
5-8 Matrix DFE-Platinum and Diamond Series Configuration Guide
Table 5-3 shows a detailed explanation of the command output.
snmpOutBadValues = 0
snmpOutGenErrs = 0
snmpOutGetRequests = 0
snmpOutGetNexts = 0
snmpOutSetRequests = 0
snmpOutGetResponses = 396601
snmpOutTraps = 0
snmpSilentDrops = 0
snmpProxyDrops = 0
--- USM Stats counters:
usmStatsUnsupportedSecLevels = 0
usmStatsNotInTimeWindows = 0
usmStatsUnknownUserNames = 0
usmStatsUnknownEngineIDs = 0
usmStatsWrongDigests = 0
usmStatsDecryptionErrors = 0
Table 5-3 show snmp counters Output Details
Output What It Displays...
snmpInPkts Number of messages delivered to the SNMP
entity from the transport service.
snmpOutPkts Number of SNMP messages passed from the
SNMP protocol entity to the transport service.
snmpInBadVersions Number of SNMP messages delivered to the
SNMP entity for an unsupported SNMP version.
snmpInBadCommunityNames Number of SNMP messages delivered to the
SNMP entity that used an SNMP community
name not known to the entity.
snmpInBadCommunityUses Number of SNMP messages delivered to the
SNMP entity that represented an SNMP
operation not allowed by the SNMP community
named in the message.
To Next Page
Loading...
