SNMP Configuration Command Set
Reviewing SNMP Statistics
Matrix DFE-Platinum and Diamond Series Configuration Guide 5-9
snmpInASNParseErrs Number of ASN.1 (Abstract Syntax Notation) or
BER (Basic Encoding Rules) errors encountered
by the SNMP entity when decoding received
SNMP messages.
snmpInTooBigs Number of SNMP PDUs delivered to the SNMP
protocol entity with the value of the error-status
field as “tooBig.”
snmpInNoSuchNames Number of SNMP PDUs delivered to the SNMP
protocol entity with the value of the error-status
field as “noSuchName.”
snmpInBadValues Number of SNMP PDUs delivered to the SNMP
protocol entity with the value of the error-status
field as “badValue.”
snmpInReadOnlys Number of valid SNMP PDUs delivered to the
SNMP protocol entity with the value of the
error-status field as “readOnly.”
snmpInGenErrs Number of SNMP PDUs delivered to the SNMP
protocol entity with the value of the error-status
field as “genErr.”
snmpInTotalReqVars Number of MIB objects retrieved successfully by
the SNMP protocol entity as the result of
receiving valid SNMP Get-Request and Get-Next
PDUs.
snmpInTotalSetVars Number of MIB objects altered successfully by
the SNMP protocol entity as the result of
receiving valid SNMP Set-Request PDUs.
snmpInGetRequests Number of SNMP Get-Request PDUs accepted
and processed by the SNMP protocol entity.
snmpInGetNexts Number of SNMP Get-Next PDUs accepted and
processed by the SNMP protocol entity.
snmpInSetRequests Number of SNMP Set-Request PDUs accepted
and processed by the SNMP protocol entity.
Table 5-3 show snmp counters Output Details (Continued)
Output What It Displays...
To Next Page
Loading...
