SNMP Configuration Command Set
Reviewing SNMP Statistics
5-10 Matrix DFE-Platinum and Diamond Series Configuration Guide
snmpInGetResponses Number of SNMP Get-Response PDUs accepted
and processed by the SNMP protocol entity.
snmpInTraps Number of SNMP Trap PDUs accepted and
processed by the SNMP protocol entity.
snmpOutTooBigs Number of SNMP PDUs generated by the SNMP
protocol entity with the value of the error-status
field as “tooBig.”
snmpOutNoSuchNames Number of SNMP PDUs generated by the SNMP
protocol entity with the value of the error-status
as “noSuchName.”
snmpOutBadValues Number of SNMP PDUs generated by the SNMP
protocol entity with the value of the error-status
field as “badValue.”
snmpOutGenErrs Number of SNMP PDUs generated by the SNMP
protocol entity with the value of the error-status
field as “genErr.”
snmpOutGetRequests Number of SNMP Get-Request PDUs generated
by the SNMP protocol entity.
snmpOutGetNexts Number of SNMP Get-Next PDUs generated by
the SNMP protocol entity.
snmpOutSetRequests Number of SNMP Set-Request PDUs generated
by the SNMP protocol entity.
snmpOutGetResponses Number of SNMP Get-Response PDUs
generated by the SNMP protocol entity.
snmpOutTraps Number of SNMP Trap PDUs generated by the
SNMP protocol entity.
snmpSilentDrops Number of SNMP Get, Set, or Inform request
error messages that were dropped because the
reply was larger than the requestor’s maximum
message size.
Table 5-3 show snmp counters Output Details (Continued)
Output What It Displays...
To Next Page
Loading...
