Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
6-92 Matrix DFE-Platinum and Diamond Series Configuration Guide
• show spantree adminedge (Section 6.2.2.19)
• set spantree adminedge (Section 6.2.2.20)
• clear spantree adminedge (Section 6.2.2.21)
• show spantree operedge (Section 6.2.2.22)
• show spantree adminpoint (Section 6.2.2.23)
• show spantree operpoint (Section 6.2.2.24)
• set spantree adminpoint (Section 6.2.2.25)
• clear spantree adminpoint (Section 6.2.2.26)