General Configuration Command Set
Managing the Management Authentication Notification MIB
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-41
Example
This example displays the state of Management Authentication Notification access types prior to 
using the clear command, then displays the same information after using the clear command:
Matrix(su)->show mgmt-auth-notify
Management Type  Status
---------------  --------
console          enabled
ssh              disabled
telnet           enabled
web              disabled
Matrix(su)->clear mgmt-auth-notify
Matrix(su)->show mgmt-auth-notify
Management Type  Status
---------------  --------
console          enabled
ssh              enabled
telnet           enabled
web              enabled