Enterasys Matrix 2G4072-52 - Page 671

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
Matrix DFE-Platinum and Diamond Series Configuration Guide 8-27
Examples
This example shows how to display policy classification information for Ethernet type 2 rules:
This example shows how to display admin rule information for the policy profile with index
number 1:
Table 8-2 provides an explanation of the command output.
Matrix(rw)->show policy rule ether
|PID |Rule Type |Rule Data |Mk|PortStr |RS|ST|S|T|D|VLAN|CoS |U|
| 1 |Ether |32923 (0x809B) |16|All | A|NV|Y|Y| | 105| |?|
| 1 |Ether |33011 (0x80F3) |16|All | A|NV|Y|Y| | 105| |?|
| 1 |Ether |33079 (0x8137) |16|All | A|NV|Y|Y| | 101| |?|
| 1 |Ether |33080 (0x8138) |16|All | A|NV|Y|Y| | 101| |?|
| 1 |Ether |33276 (0x81FC) |16|All | A|NV|Y|Y| |drop| |?|
| 2 |Ether |32923 (0x809B) |16|All | A|NV|Y|Y| | 105| |?|
| 2 |Ether |33011 (0x80F3) |16|All | A|NV|Y|Y| | 105| |?|
| 2 |Ether |33079 (0x8137) |16|All | A|NV|Y|Y| | 101| |?|
Matrix(rw)->show policy rule admin-pid 1
|Admin|Rule Type |Rule Data |Mk|PortStr |RS|ST|S|T|D|dPID|aPID|U|
|admin|Port |fe.1.1 |16|fe.1.1 | A|NV| | | | | 1|?|
|admin|Port |fe.1.2 |16|fe.1.2 | A|NV| | | | | 1|?|
|admin|Port |fe.1.3 |16|fe.1.3 | A|NV| | | | | 1|?|
|admin|Port |fe.1.4 |16|fe.1.4 | A|NV| | | | | 1|?|
|admin|Port |fe.1.5 |16|fe.1.5 | A|NV| | | | | 1|?|
|admin|Port |fe.1.6 |16|fe.1.6 | A|NV| | | | | 1|?|
Table 8-2 show policy rule Output Details
Output What It Displays...
PID Profile profile index number, indicating a classification rule
is displayed. Assigned to this classification rule with the set
policy profile command (Section 8.3.1.2).
Admin Indicates an admin rule is displayed.
Rule Type Whether the rule protocol-based or port-based. Refer to
Table 8-3 for valid classification types.
Rule Data Rule data value. Refer to Table 8-3 for valid values for each
classification type.
Mk Rule data mask. Refer to Table 8-3 for valid values for each
classification data value.