Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-28 Matrix DFE-Platinum and Diamond Series Configuration Guide
PortStr Ingress port(s) to which this rule applies.
RS Whether or not the status of this rule is active (A), not in
service or not ready.
ST Whether or not this rule’s storage type is non-volatile (NV)
or volatile (V).
S Whether or not Syslog is enabled (Y) or disabled for this
rule.
T Whether or not SNMP traps are enabled (Y) or disabled for
this rule.
D Whether or not the port disable feature is enabled (Y) or
disabled for this rule.
Vlan VLAN ID to which this rule applies and whether or not
matching packets will be dropped or forwarded.
CoS Class of Service value to which this rule applies.
U Whether or not this rule has been used.
dPID Whether or not this is a dynamic profile ID.
aPID Whether or not this is an administrative profile index ID.
Table 8-2 show policy rule Output Details (Continued)
Output What It Displays...
To Next Page
Loading...
