General Configuration Command Set
Setting Basic Device Properties
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-43
• set cli completion (Section 2.2.3.20)
• loop (Section 2.2.3.21)
• show banner motd (Section 2.2.3.22)
• set banner motd (Section 2.2.3.23)
• clear banner motd (Section 2.2.3.24)
• show version (Section 2.2.3.25)
• set system name (Section 2.2.3.26)
• set system location (Section 2.2.3.27)
• set system contact (Section 2.2.3.28)
• set width (Section 2.2.3.29)
• set length (Section 2.2.3.30)
• show logout (Section 2.2.3.31)
• set logout (Section 2.2.3.32)
• show physical alias (Section 2.2.3.33)
• set physical alias (Section 2.2.3.34)
• clear physical alias (Section 2.2.3.35)
• show physical assetid (Section 2.2.3.36)
• set physical assetid (Section 2.2.3.37)
• clear physical assetid (Section 2.2.3.38)
To Next Page
Loading...
