Enterasys Matrix 2G4072-52 - Page 804

Logging And Network Management Command Set
Configuring System Logging
11-14 Matrix DFE-Platinum and Diamond Series Configuration Guide
Example
This example shows how to display system logging information pertaining to the all supported
applications.
This example shows how to display system logging information pertaining to the SNMP
application.
Table 11-2 provides an explanation of the command output.
Matrix(su)->show logging application
Application Current Severity Level Server List
----------------------------------------------------------
88 RtrAcl 6 1-8
89 CLI 6 1-8
90 SNMP 6 1-8
91 Webview 6 1-8
93 System 6 1-8
95 RtrFe 6 1-8
96 Trace 6 1-8
105 RtrLSNat 6 1-8
111 FlowLimt 6 1-8
112 UPN 6 1-8
117 AAA 6 1-8
118 Router 6 1-8
140 AddrNtfy 6 1-8
141 OSPF 6 1-8
142 VRRP 6 1-8
145 RtrArpProc 6 1-8
147 LACP 6 1-8
1(emergencies) 2(alerts) 3(critical)
4(errors) 5(warnings) 6(notifications)
7(information) 8(debugging)
Matrix(rw)->
show logging application SNMP
Application Current Severity Level Server List
----------------------------------------------------------
90 SNMP 6 1-8
1(emergencies) 2(alerts) 3(critical)
4(errors) 5(warnings) 6(notifications)
7(information) 8(debugging)