Logging And Network Management Command Set
Configuring System Logging
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-15
Table 11-2 show logging application Output Details
Output What It Displays...
Application A mnemonic abbreviation of the textual description for
applications being logged.
Current Severity
Level
Severity level at which the server is logging messages for
the listed application. This range (from 1 to 8) and its
associated severity list is shown in the CLI output. For a
description of these entries, which are set using the set
logging application command, refer to Section 11.2.1.9.
Server List Servers to which log messages are being sent.
To Next Page
Loading...
