Logging And Network Management Command Set
Monitoring Network Events and Status
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-31
Table 11-4 provides an explanation of the command output.
Table 11-4 show netstat Output Details
Output What It Displays...
PCB Protocol Control Block designation.
Proto Type of protocol running on the connection.
Recv-Q Number of queries received over the connection.
Send-Q Number of queries sent over the connection.
Local Address IP address of the connection’s local host.
Foreign Address IP address of the connection’s foreign host.
(state) Communications mode of the connection (listening, learning
or forwarding).
To Next Page
Loading...
