IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
Matrix DFE-Platinum and Diamond Series Configuration Guide 12-79
12.2.8.5 predictor
Use this command to specify which load balancing algorithm to use for selecting a real server in an
LSNAT server farm.
predictor [roundrobin | leastconns]
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command resets the selection algorithm to Round Robin:
no predictor
Command Type
Router command.
Command Mode
SLB Server Farm Configuration mode: Matrix>Router1(config-slb-sfarm)#
Command Defaults
If not specified, Round Robin will be used as the selection algorithm.
Example
This example shows how to specify Least Connections as the server selection algorithm for the
“httpserver” server farm:
roundrobin |
leastconns
(Optional) Specifies Round Robin or Least Connections as
the selection algorithm.
Matrix>Router1(config)#ip slb serverfarm httpserver
Matrix>Router1(config-slb-sfarm)#predictor leastconns
To Next Page
Loading...
