Enterasys Matrix 2G4072-52 - Page 1056

IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
12-96 Matrix DFE-Platinum and Diamond Series Configuration Guide
12.2.8.16 inservice (virtual server)
Use this command to enable a virtual LSNAT server.
inservice
Syntax Description
None.
Command Syntax of the “no” Form
The “no” form of this command removes the virtual server from service:
no inservice
Command Type
Router command.
Command Mode
SLB Virtual Server Configuration mode: Matrix>Router1(config-slb-vserver)#
Command Defaults
None.
Example
This example shows how to enable virtual server named “virtual-http”:
Matrix>Router1(config)#ip slb serverfarm httpserver
Matrix>Router1(config-slb-sfarm)#real 10.1.2.1 port 80
Matrix>Router1(config-slb-real)#inservice
Matrix>Router1(config-slb-real)#exit
Matrix>Router1(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router1(config-slb-real)#inservice
Matrix>Router1(config-slb-real)#exit
Matrix>Router1(config-slb-sfarm)#exit
Matrix>Router1(config)#ip slb vserver virtual-http
Matrix>Router1(config-slb-vserver)#serverfarm httpserver
Matrix>Router1(config-slb-vserver)#virtual 10.1.4.5 tcp www
Matrix>Router1(config-slb-vserver)#inservice