Security Configuration Command Set
Configuring 802.1X Authentication
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-43
This example shows how to display authentication session statistics for fe.1.1:
This example shows how to display authentication statistics for fe.1.1:
Matrix(rw)->show dot1x auth-session-stats fe.1.1
Port: 1 Auth-Session-Stats:
Session Octets Rx: 0
Session Octets Tx: 0
Session Frames Rx: 0
Session Frames Tx: 0
Session Id: (1, 00-00-00-00-00-00)
Session Authentic Method: Remote Auth Server
Session Time: 0 secs
Session Terminate Cause: Port Failure
Session UserName:
Matrix(rw)->show dot1x auth-stats fe.1.1
Port: 1 Auth-Stats:
EAPOL Frames Rx: 0
EAPOL Frames Tx: 0
EAPOL Start Frames Rx: 0
EAPOL Logoff Frames Rx: 0
EAPOL RespId Frames Rx: 0
EAPOL Resp Frames Rx: 0
EAPOL ReqId Frames Tx: 0
EAPOL Req Frames Tx: 0
Invalid EAPOL Frames Rx: 0
EAP Length Error Frames Rx: 0
Last EAPOL Frame Version: 0
Last EAPOL Frame Source: 0:0:0:0:0:0
To Next Page
Loading...
