vendor-class-identifier
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
967
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
VENDOR-CLASS-IDENTIFIER
vendor-class-identifier <identifier>
DESCRIPTION
This command is entered in the DHCP Client Configuration Object Mode. This
command is used to configure the vendor class identifier option for a client object.
This is used by the client to send its vendor information to the server.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-dhcp-client-client1)# vendor-class-identifier
broadband-forum.org
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
identifier Vendor class identifier.
To Next Page
Loading...
