Alcatel-Lucent OmniAccess 5740 - Show Eth-Cfm Mep

show eth-cfm mep
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
365
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW ETH-CFM MEP
show eth-cfm mep <1-8191> domain <0-65535> association <0-
65535>
DESCRIPTION
This is entered in the Super User Mode or Configuration Mode. This command
displays MEP information.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show eth-cfm mep 10 domain 100 association 100
2010 Mar 10 15:07:47: %CLI-3-ETH-OAM-CMI: oam_fs_close: fd : 12 reason : 0
---------------------------------------------------------
MEP Information
---------------------------------------------------------
md_Index: 100
ma_Index: 100
mep_Index: 10
Interface Name: GigabitEthernet 3/0 AdminState: Up Direction: Down
MacAddress: 00e0.b1c6.df2a
CCM Enable: Enabled
CCM/LTM Priority: 0 CcmTx: 72850 CcmSequenceErr: 30
AlarmSet Time: 250 AlarmReset Time: 250
LowestPrior Defect: DefMACstatus DefRemoteCCM DefErrorCCM DefXconCCM
HighestDefect: DefNone
Defect Flags: DefNone
AIS-Enable: Disabled
AIS Priority: 1 AIS Interval: 1 AIS Level: 0
Parameter Description
1-8191 An integer, unique over a given MA,
identifying a specific MEP.
domain <0-65535> An unique integer identifying a specific
maintenance domain.
association <0-65535> An unique integer identifying a specific
maintenance association.