no ip dhcp relay
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
975
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO IP DHCP RELAY
no ip dhcp relay [<dhcp server ip-address>]
This command is entered in the Interface Configuration Mode. This command is
used to disable all/a specific relay configured on an interface.
NO IP DHCP RELAY INTERFACE
no ip dhcp relay interface <interface-name>
This command is entered in the Interface Configuration Mode. This command is
used to disable the relay of DHCP requests to the specified interface.
SHOW IP DHCP RELAY
show ip dhcp relay [<interface-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command shows the DHCP Relay configuration of all/an interface.
PARAMETERS
EXAMPLE
ALU(config)# show ip dhcp relay
Interface Relay destination
GigabitEthernet3/0 192.168.1.1
GigabitEthernet3/0 GigabitEthernet3/1
Parameter Description
interface-name Shows the DHCP Relay configuration on
the specified interface.
To Next Page
Loading...
Need help?
General
