neighbor maximum-prefix
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
517
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NEIGHBOR MAXIMUM-PREFIX
neighbor {<ip-address>|<peer-group-name>} maximum-prefix <1-
4294967295> [<1-100>] [warning-only]
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
configures the maximum number of prefixes that can be received from a neighbor.
PARAMETERS
DEFAULT
This command is disabled by default. There is no limit on the number of prefixes.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 maximum-prefix
20000 50
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of a BGP peer group.
1-4294967295 Maximum number of prefixes allowed from this neighbor.
1-100 The threshold value in percentage at which warning
messages are generated. The default is 75%.
warning-only Allows the router to generate warning message when the
maximum limit is exceeded, instead of terminating the
peering.
To Next Page
Loading...
Need help?
General
