Open Shortest Path First
Left running head:
Chapter name (automatic)
552
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
AREA NSSA
area {<0-4294967295>|<ip-address>} nssa [default-information-
originate] [no-summary] [no-redistribution]
DESCRIPTION
This command is entered in the Router Configuration Mode. Defines an area to be
NSSA.
PARAMETERS
DEFAULT VALUE
No NSSA area is defined.
EXAMPLE
ALU(config-router ospf 30)# area 1 nssa
Parameter Description
0-4294967295 OSPF area ID as a decimal value.
ip-address OSPF area ID in IP address format.
no
redistribution
Used when the router is an NSSA ABR and you want the
redistribute command to import routes only into the normal
areas, but not into the NSSA area.
default-
information-
originate
Used to generate a Type 7 default into the NSSA area. This
keyword takes effect only on NSSA ABR or NSSA ASBR.
no-summary Allows an area to be a not-so-stubby area but not have
summary routes injected into it.