Alcatel-Lucent OmniAccess 5740 - Show Vlan

show vlan
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
193
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW VLAN
show vlan {Brief|id <1-4094>}
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays the configuration of the VLANs configured.
PARAMETERS
EXAMPLE
ALU# show vlan id 10
VLAN_ID Status Interface name Mode
--------- ---------- ------------------- -----
10 Inactive switchport0/0 Access
ALU(config)# show vlan Brief
VLAN_ID Status Interface name Mode
-------- ---------- ------------------- -----
1 Inactive switchport0/2 No-Mode
switchport0/3 No-Mode
switchport0/4 No-Mode
switchport0/5 No-Mode
10 Inactive switchport0/0 Access
switchport0/7 Access
switchport0/6 Trunk
20 Inactive switchport0/1
Parameter Description
Brief Displays all the VLANs that are configured on
the OmniAccess 5740 USG.
id Displays the configuration for a specific VLAN.