System Configuration and Monitoring
Left running head:
Chapter name (automatic)
92
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
RADIUS-SERVER TIMEOUT
radius-server timeout <1-1000>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
specify a global timeout value that will be applied to all the RADIUS groups
(provided there is no server specific timeout value configured).
PARAMETERS
DEFAULT VALUE
The default timeout value is 5 seconds.
EXAMPLE
ALU(config)# radius-server timeout 10
Parameter Description
timeout <1-1000> Number of seconds that the
OmniAccess 5740 USG should wait for a
reply from the RADIUS server before
retrying.
To Next Page
Loading...
