Open Shortest Path First
Left running head:
Chapter name (automatic)
574
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
ROUTER-ID
router-id <ip-address>
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
configures OSPF router ID.
PARAMETERS
DEFAULT VALUE
Default Router ID is generated using interface IP addresses.
EXAMPLE
ALU(config-router ospf 30)#router-id 35.0.0.1
ROUTER OSPF
router ospf <1-65535>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure an OSPF routing process.
PARAMETERS
DEFAULT VALUE
No OSPF routing process is defined.
EXAMPLE
ALU(config)# router ospf 30
ALU(config-router ospf 30)#
Parameter Description
ip-address Router ID in IP address format.
Parameter Description
1-65535 Internally used identification parameter for an OSPF routing
process. It is locally assigned and can be any positive
integer. A unique value is assigned for each OSPF routing
process.
To Next Page
Loading...
Need help?
General
