Alcatel-Lucent OmniAccess 5740 - Show Ppp Ipcp Configuration; Show Ppp Ipcp Statistics

show ppp ipcp configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
307
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW PPP IPCP CONFIGURATION
show ppp ipcp configuration Serial <slot/port:channel>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays PPP IPCP configuration information for a specified interface.
PARAMETERS
EXAMPLE
ALU# show ppp ipcp configuration Serial 0/0:0
IPCP pool IP address: 50.51.52.54
IPCP local IP address from peer: Reject
IPCP peer IP address: Reject
SHOW PPP IPCP STATISTICS
show ppp ipcp statistics Serial <slot/port:channel>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays detailed IPCP statistics for a specified interface.
PARAMETERS
EXAMPLE
ALU# show ppp ipcp statistics Serial 0/0:0
IN OUT
IPCP Configure Requests: 6 13
IPCP Configure Acks: 6 6
IPCP Configure Naks: 5 0
IPCP Configure Rejects: 2 0
IPCP Terminate Requests: 0 2
IPCP Terminate Acks: 2 0
IPCP Code Rejects: 0 0
IPCP Invalid Packets: 0 0
Parameter Description
<slot/port:channel> Slot, port and channel group number of the
serial interface.
Parameter Description
<slot/port:channel> Slot, port and channel group number of the
serial interface.