Alcatel-Lucent OmniAccess 5740 - Vrrp Group-ID Timers Advertise

vrrp group-id timers advertise
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
165
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
VRRP GROUP-ID TIMERS ADVERTISE
vrrp <1-8> timers advertise {<1-255>|msec <50-999>}
DESCRIPTION
This command is used in the Interface Configuration Mode. This command
configures the interval between successive advertisements by the master virtual
router in a VRRP group. The unit is in seconds unless the optional "msec"
parameter is specified.
PARAMETERS
DEFAULT VALUE
Default is one second.
EXAMPLE
ALU(config-if GigabitEthernet3/0)# vrrp 7 timers advertise 5
Parameter Description
1-8 Specifies the group number. It is in the range 1 - 8.
1-255 By default the timer value is configured in seconds.
Its in the range: 1 - 255 seconds.
50-999 The timer value can be configured in milliseconds
by using the keyword ‘msec’. Its in the range:
50 - 999 milliseconds.