show ip bgp dampened-paths
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
537
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP BGP DAMPENED-PATHS
show ip bgp dampened-paths
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the paths suppressed due to dampening.
PARAMETERS
None.
EXAMPLE
ALU# show ip bgp dampened-paths
BGP local router ID is 111.111.111.111
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Prefix/len From Reuse Path
*d 7.0.0.0/8 1.1.1.2 00:18:10 100i
*d 118.0.0.0/24 111.111.111.11200:22:20 300?
ALU#
Field Description
local router IP address of the router where route dampening is enabled.
*d Route to the network indicated is dampened.
From IP address of the peer that advertised this path.
Reuse Time (in hours:minutes:seconds) after which the path will be
made available.
Path AS path of the route that is being dampened.
To Next Page
Loading...
