Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

DHCP (Dynamic Host Configuration Protocol) Server
Left running head:
Chapter name (automatic)
938
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
OPTION DOMAIN-NAME
option domain-name <name>
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to configure the domain name to be used by the clients.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-dhcp-pool-p1)# option domain-name alu
OPTION LEASE-TIME
option lease-time <1-315360000>
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to configure the time (in seconds) for which a client can use the IP address
assigned to it.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-dhcp-pool-p1)# option lease-time 106400
Parameter Description
name Domain name to be used by the clients.
Parameter Description
1-315360000 Specify the time for which a client can
use the IP address assigned to it.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English