Alcatel-Lucent OmniAccess 5740 - Set As-Path

set as-path
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
447
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SET AS-PATH
set as-path {tag|prepend [<1-65535>]}
DESCRIPTION
This command is entered in the Route-Map Configuration Mode. This command
modifies the BGP autonomous system path.
PARAMETERS
DEFAULT VALUE
Autonomous system path is not specified.
EXAMPLE
ALU(config-route-map)# set as-path tag
Parameter Description
tag Converts the tag of a route into an autonomous system
path. This is applicable only when routes are redistributed
into BGP.
prepend [<1-
65535>]
Appends the string following the keyword prepend to the
autonomous system path of the route that is matched by the
route-map. Applies to inbound and outbound BGP route
maps.