Alcatel-Lucent OmniAccess 5740 - Distance Ospf

Protocol Independent Features
Left running head:
Chapter name (automatic)
424
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
DISTANCE OSPF
distance ospf {external|inter-area|intra-area} <1-255>}}
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
performs the same function as the distance command used with an access list.
However, the distance OSPF command allows you to set a distance for an entire
group of routes, rather than a specific route that matches an access-list.
PARAMETERS
DEFAULT VALUE
Default administrative distance for all OSPF routes is 110.
EXAMPLE
ALU(config-router ospf 1)# distance ospf external 10
Parameter Description
external Distance for external routes.
inter-area Distance for inter-area routes.
intra-area Distance for intra-area routes.
1-255 Administrative distance.