Switching on L2 Ports
Left running head:
Chapter name (automatic)
188
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW CHASSIS
show chassis
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays all the cards configured on the OmniAccess 5740 USG. Issue
this command to check if the L2 card is installed appropriately in the system.
PARAMETERS
None.
EXAMPLE
ALU> show chassis
Physical inventory at Fri Apr 23 15:29:41 2010
System started approximately Thu Apr 22 13:04:04 2010
Uptime is 1 days 2 hours 27 minutes 50 seconds
T1/E1 - Four port T1/E1 (active)
Slot number: 0
Part number: 902604-90
Manufacturer: ALU
Description: Four port T1/E1
Serial number: DG0820000194
Version: 03
Revision: 00
LoL firmware version: 2.2.71
Loader version: 2.35
ALU-OS version: 3.0.0
L2 - 8-port copper GigE (active)
Slot number: 1
Part number: 902603-90
Manufacturer: ALU
Description: 8-port copper GigE
Serial number: DG0820001094
Version: 03
Revision: 00
LoL firmware version: 2.2.71
Loader version: 2.35
ALU-OS version: 3.0.0
MDC
Serial number: DG0820000461
Revision: 00
Version: 03
SE - Services engine (active)
Slot number: 3
Part number: 902601-90
Manufacturer: ALU
Description: Services engine
Serial number: SM0622000067
Version: 01
Revision: 00